Acer Car Video System A231H User Manual

0

Out of 0 Ratings

Owner's of the Acer Car Video System A231H gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 107
 
Acer Acer –LCD-A231H
5.2 Optical characteristic of LCD panel
The test methods for the below items’ definition, please refer to the specification of INL
MT230DW01
panel.
Item Unit Conditions Min. Typ. Max. Remark
Right 70 80
[degree]
Horizontal
Left 70 80
-
-
Up 70 80
Viewing Angle
(
CR >= 10)
[degree]
Vertical
Down 70 80
-
-
Contrast ratio
Normal Direction 600 1000
Response time
[msec] Rising + Falling - 5 10
Red x 0.640
Red y 0.349
Green x 0.284
Green y 0.617
Blue x 0.142
Color Chromaticity
(CIE)
Blue y 0.067
White x 0.313
Color Coordinates (CIE)
White
White y
Typ-0.03
0.329
Typ+0.03
Luminance Uniformity
[%] 9 points
measurement
75% -
White Luminance at center
point
[cd/m
2
]
200 250 -
5.3 Keypad Function
5.3.1
Control buttons
[AUTO]
A. When OSD un-displays, press [AUTO] and the function menu will show on the screen;
B. When function menu displays, press [AUTO] to perform auto-adjustment;
C. When OSD displays, press [AUTO] to return to previous level menu;
D. When “e Color OSD” OSD displays, press [AUTO] to exit the OSD.
[MENU]
A. When OSD isn’t shown on screen, press [MENU] to enter the function menu;
B. When function menu displays, press [AUTO] to enter the main menu OSD;
C. When OSD displays, press [MENU] to perform function of menu icon that is highlight or
enter next level menu
[◄]
A. When OSD isn’t show on screen, press [◄] to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays, press [◄] to show “Audio” OSD and decrease the
volume.
[►]
A. When OSD isn’t show on screen, press [►]to enter the function menu;
B. When “MENU OSD” displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays:
a. Press [►] key one time to search (a port with signal in order)
b. Show “source icon” at the same time, as searching that port
c. Go into next port automatically, if search the port without signal
d. Display it, if search the port with signal
D. When the volume menu displays, press [►] to increase the volume.
[e Color ]
A. When function menu displays, press [e Color] to show “e Color OSD”, and press
again the OSD can not disappear, but the time of “e Color OSD ”disappearing is reset
to 10 seconds again.
B. When OSD disappear not including “e Color OSD”, press [e Color] to show “e Color
OSD” OSD, the OSD before disappears, but the parameters of it should be saved

   Find Your Products By Category