Cisco Systems Network Card 32369 User Manual

0

Out of 0 Ratings

Owner's of the Cisco Systems Network Card 32369 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
Prerequisites
4
Release 12.0(1)T
Prerequisites
Before you configure the Cisco IOS DHCP Server feature, complete the following tasks:
• Identify an external File Transport Protocol (FTP), Trivial File Transfer Protocol (TFTP), or
remote copy protocol (rcp) server that you will use to store the DHCP bindings database.
• Identify the IP addresses that you will enable the DHCP server to assign, and the IP addresses
that you will exclude.
• Identify DHCP options for devices where necessary, including:
— Default boot image name
— Default router(s)
— Domain Name System (DNS) server(s)
— NetBIOS name server
• Decide on a NetBIOS node type (b, p, m, or h).
• Decide on a DNS domain name.
DHCP Configuration Task List
The DHCP server database is organized as a tree. The root of the tree is the address pool for natural
networks, branches are subnetwork address pools, and leaves are manual bindings to clients.
Subnetworks inherit network parameters and clients inherit subnetwork parameters. Therefore,
common parameters, for example the domain name, should be configured at the highest (network or
subnetwork) level of the tree.
Note Inherited parameters can be overridden. For example, if a parameter is defined in both the
natural network and a subnetwork, the definition of the subnetwork is used.
Address leases are not inherited. If a lease is not specified for an IP address, by default, the DHCP
server assigns a one-day lease for the address.
To configure the Cisco IOS DHCP Server feature, first configure a database agent or disable conflict
logging, then configure IP addresses that the DHCP server should not assign (excluded addresses)
and should assign (a pool of available IP addresses) to requesting clients. These configuration tasks
are explained in the following sections. Each task in the following list is identified as required or
optional.
• Configuring a DHCP Database Agent or Disabling DHCP Conflict Logging (Required)
• Excluding IP Addresses (Required)
• Configuring a DHCP Address Pool (Required)
• Configuring Manual Bindings (Optional)
• Configuring a DHCP Server Boot File (Optional)
• Configuring the Number of Ping Packets (Optional)
• Configuring the Timeout Value for Ping Packets (Optional)
• Enabling the Cisco IOS DHCP Server Feature (Optional)

   Find Your Products By Category