Genie Utility Vehicle GS-3390 User Manual

0

Out of 0 Ratings

Owner's of the Genie Utility Vehicle GS-3390 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 36
 
Part No. 82828 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 17
Operator's Manual
Second Edition • Third Printing
FUNCTION TESTS
Test Up/Down Functions and Function Enable
The audible warnings on this machine come from
the same central alarm. The descent alarm sounds
at 60 beeps per minute. The alarm that goes off
when the machine is not level sounds at 180 beeps
per minute.
7 Do not push the lift function
enable button. Push and hold
the platform up button.
Result: No function should operate.
8 Push and hold the lift function enable button.
Push and hold the platform up button.
Result: The platform should raise.
9 Push and hold the lift function enable button.
Push and hold the platform down button.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
Test the Auxiliary Lowering
10 Push and hold the lift function enable button and
raise the platform approximately 60 cm.
11 Push in the red Emergency Stop button to shut
off the engine.
12 Pull out the red Emergency Stop button to the
on position.
13 Push and hold the lift function enable button.
Push and hold the platform down button.
Result: The platform should lower.
14 Turn the key switch to platform control and
restart the engine.
At the Platform Controls
Test Emergency Stop
15 Push in the platform red Emergency Stop button
to the off position.
Result: No functions should operate.
16 Pull the red Emergency Stop button out to the
on position.
Result: The green power light should come on.
Test the Horn
17 Push the horn button.
Result: The horn should sound.
Test Up/Down Functions and Function Enable
18 Start the engine.
19 Activate the up/down rocker switch in the
direction indicated by the blue arrow.
Result: The platform should not raise.
20 Push and hold the lift function
enable button.
21 Activate the up/down rocker switch
in the direction indicated by the
blue arrow.
Result: The platform should raise.
22 Push and hold the lift function enable button.
23 Activate the up/down rocker switch in the
direction indicated by the yellow arrow.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.

   Find Your Products By Category