3D Connexion Elliptical Trainer PS520 Series Ovens User Manual

0

Out of 0 Ratings

Owner's of the 3D Connexion Elliptical Trainer PS520 Series Ovens gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 48
 
26
SECTION 3
OPERATION
V. QUICK REFERENCE: TROUBLESHOOTING
SYMPTOM PROBLEM SOLUTION
The oven temperatureex-
ceeded650°F(343°C),and
the burner was automatically
shut down.
• FollowtheproceduresunderDaily Shutdown Procedures in this
section to shut down the oven. Contact your Middleby Marshall
Authorized Service Agent to determine and correct the cause of
the condition to prevent damage to the oven.
IFTHESESTEPSFAILTORESOLVETHEPROBLEM,CONTACTYOURLOCALMIDDLEBYMARSHALL
AUTHORIZEDSERVICEAGENT.ASERVICEAGENCYDIRECTORYISSUPPLIEDWITHYOUROVEN.
light is lit, food product is
undercooked
Oven will not
turn on at all
appears in display,
oven is not heating
Oven will not heat
Oven is operating, but little
or no air is blowing from air
ngers
Electrical power may not
be reaching the oven, or
the controls may be set
incorrectly.
The oven did not reach
200°F (93°C) within 15
minutes of startup, and the
oven has stopped heating.
Controls may be set incor-
rectly.
Airngersmayhavebeen
reassembled incorrectly
after cleaning.
• Checkthatthecircuitbreaker/fuseddisconnectisturnedon.
• Checkthatthe"BLOWER"( ) Switchisinthe“ON”("I")posi-
tion.
• Turnthe"HEAT"( ), "BLOWER"( ),and"CONVEYOR"(
)switchestothe"OFF"("O")position.
• WaitforATLEASTFIVEMINUTESbeforerestartingtheoven.
• RepeattheDailyStartupprocedure.
• CheckthattheSetPointiscorrectlyset.
• Checkthatboththe"BLOWER"( ) and"HEAT"( ) Switches
areinthe“ON”("I")position.
• Iftheovenstillwillnotheat,turnthe"HEAT"( ), "BLOWER"(
),and"CONVEYOR"( )switchestothe"OFF"("O")posi-
tion.
• WaitforATLEASTFIVEMINUTESbeforerestartingtheoven.
• RepeattheDailyStartupprocedure.CheckthattheSetPoint
isabove200°F(93°C).
• Turntheoventothe“OFF”or“O”position,andallowittocool.
Disconnect electrical power to the oven.
• RefertoSection4,Maintenance, for instructions on reassembling
theairngers.
• Turntheoventothe“OFF”or“O”position,andallowittocool.
Disconnect electrical power to the oven.
• Checkiftheconveyorisblockedbyanobjectinsidetheoven.
• RefertoSection4,Maintenance, for instructions on checking
the conveyor and drive chain tension.
• Checkthatthesettemperatureandbaketimesettingsarecor-
rect.
Conveyor moves with a
jerky motion, or will not
move at all
Food products are over-
cooked or undercooked.
Conveyor may be jammed
on an object in the oven, or
conveyor belt or drive chain
tension may be incorrect.
Controls may be set incor-
rectly.

   Find Your Products By Category