Genie Utility Vehicle Z-60, Z-34 User Manual

3.0

Out of 1 Ratings

Owner's of the Genie Utility Vehicle Z-60, Z-34 gave it a score of 3.0 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    3.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    3.0 out of 5

  • Ease of Use

    3.0 out of 5
of 41
 
Operator's Manual Sixth Edition · Second Printing
26 Z-60/34 Part No. 1000209
To Position Platform
1 Press down the foot switch.
2 Slowly move the appropriate function control
handle or toggle switch according to the
markings on the control panel.
To Steer
1 Press down the foot switch.
2 Slowly move the control handle in the direction
indicated by the blue or yellow triangles
OR press the thumb rocker switch located on
top of the drive control handle.
Use the color-coded direction triangles on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
To Drive
1 Press down the foot switch.
2 Increase speed: Slowly move the drive control
handle off center.
Decrease speed: Slowly move the drive control
handle toward the center.
Stop: Return the drive control handle to the
center or release the foot switch.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Machine travel speed is restricted when the booms
are raised or extended.
Auxiliary Controls
Use auxiliary power only if the primary power
source (engine) fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when operating the
auxiliary controls from the platform.
4 Simultaneously hold the auxiliary
power switch on and activate the
desired function.
The drive function will not operate with auxiliary
power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to
the on position.
3 Start the engine.
To Position Platform
1 Hold the function enable switch to
either side.
2 Move the appropriate toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out both the ground and platform red
Emergency Stop buttons to the on position.
3 Start the engine. Do not press down the foot
switch when starting the engine.
OPERATING INSTRUCTIONS

   Find Your Products By Category